Product Introduction of the Sludge Dewatering Machine for Wastewater Treatment
The Sludge Dewatering Machine for Wastewater Treatment developed by HOLLY utilizes the dewatering principles of force-water homo-direction, thin-layer dewatering, proper pressure and extension of the sludge dewatering path. The new equipment, more advanced than the traditional dewatering equipment which are easily blocked, unsuitable for low-concentrated sludge and oily sludge, of high consumption and difficult to operate, well eliminate these problems and are of higher efficiency and power saving.
Main Features of the Sludge Dewatering Machine for Wastewater Treatment
1. Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l
2.Fixed and moving plates replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge
3.Low running speed, low noise, low power consumption, 1 /8 of Belt Press and 1 /20 of centrifuge
4.Less capital construction cost, more excellent working performance
5.Fully automatic control, Easy operation and simple maintenance
Technical Parameters of the Sludge Dewatering Machine for Wastewater Treatment
Advantages of the Sludge Dewatering Machine for Wastewater Treatment
Applicable sludge concentration of 2000mg/L-50000mg/L.
Most especially for the oily sludge.
Fully Automatic Control
Combining with the auto control system, the machine runs very safely and simply and can be programmed according to the requirement of the users. It can operate automatically for 24 hours, unmanned.
Low Running Cost
Power-use: less than 5% of centrifuge.
Water-use: less than 0.1% of belt filter press. Polymer: saving around 60%.
Room: saving more than 60% of the investment for dehydration room.
Self-cleaning with small amount of water.
Suit for Oily Sludge
No secondary pollution
The screw shaft rotational speed about 2~3r/min, no vibration and noise is very small .
Only need a small amount of water for self-cleaning, no secondary water pollution.
Sludge runs at a slow operating condition. The smell does not spread.
Production details of the Sludge Dewatering Machine for Wastewater Treatment
Packaging and Delivery of the Sludge Dewatering Machine for Wastewater Treatment
Yixing Holly Technology Co.,Ltd
Add: Gaocheng Village, Gaocheng Town,Yixing, Jiangsu,China
Tel: +86-510-87229907 Fax: +86-510-87975997
Holly Technology is one of the leading sludge dewatering machine for wastewater treatment manufacturers and suppliers in China. Used for sewage treatment and aquaculture, this best selling equipment made in China is sold at factory price. Welcome to wholesale quality products for sludge treatment with us.